Search This Supplers Products:All - in - one PCmini pcMotherboardPOS MachineDesktop computer hostDiscrete graphics
Operating Steps for Brushing BIOS
1. Prepare a USB flash drive, make the USB flash drive into a bootable USB flash drive in FAT32 format (special software is available on the Internet), copy BIOS files into the USB flash drive and plug the USB flash drive into the computer.
2. Press F11 to enter the "Select boot device" interface, press the up and down direction keys to move to the USB key, and press Enter to enter the USB boot. The following figure
3. After entering the USB flash drive to boot, enter "1" and enter for BIOS writing.
4. The BIOS brush-writing screen is shown in the following figure, and a row of green fonts: FPT Operation Passed, which indicates the success of BIOS brush-writing. The following figure:
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.